Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd.
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. Comprehensive,high quality,Efficiency
Add to Cart
Customiozed Casting Regulating Ball Valve Gate Valve Butterfly Valve Seat For Oil/Water
Grade List
| Grade | WC% | CO% | Hardness (HRA) | Desnity (G/M³) | T.R.S (Mpa) | Metallographic analysis | Application |
| YG6 | 94% | 6% | 91 | 14.6-15.0 | 1700 | A02B02C02 | Widely used in all kinds of hardware industry, valve, bearing, die casting , punching, grinding measurement. |
| YG6X | 94% | 6% | 92 | 14.6-15.0 | 1450 | A02B02C02 | Widely used in all kinds of hardware industry, valve, bearing, die casting , punching, grinding measurement. |
| YG8 | 92% | 8% | 89 | 14.4-14.8 | 1800 | A02B02C02 | Widely used in valves,bearing, die casting , punching, grinding measurement,hardness tester, petroleum, chemical industry, aeronautics and astronautics. |
Grade and applicaton for valve seat
| Grade | Co (wt%) | Density (g/cm³) | Hardness(HRA) | TRS (≥N/mm²) | Application |
| XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 | Wear-resistant |
| XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 | |
| XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 | |
| XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 | |
| XC300 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 2600 | |
| XC301 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 3200 | |
| Grade | Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Application |
| XN100 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 1800 | Corrosion-resistant |
| XN101 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 2200 | |
| XN300 | 10.0-11.0 | 14.2-14.6 | 86.5-89.5 | 2100 | |
| XN301 | 10.0-11.0 | 14.2-14.6 | 86.5-89.5 | 2400 |
| Seats dimension (mm) | ||
| D | d | H |
| 19.48 | 11.68 | 12.7 |
| 22.66 | 13.97 | 12.7 |
| 28.22 | 17.02 | 12.7 |
| 33.81 | 20.96 | 12.7 |
| 36.09 | 24.38 | 12.7 |
| 41.43 | 26.92 | 12.7 |
| 48.79 | 33.27 | 12.7 |
| 74.93 | 43.18 | 19.05 |
| Ball dimension (mm) | ||
| D±1.27(mm) | ||
| 15.88 | ||
| 19.05 | ||
| 23.83 | ||
| 28.58 | ||
| 31.75 | ||
| 34.93 | ||
| 42.88 | ||
| 57.15 |
Production Process
FAQ
Q1: How long is your delivery period?
A1: It depends on specific conditions. However, it could be 10 to 15 days on average.
Q2: Do you offer samples?
A2: Yes, we do offer samples. However, buyers need to pay for the freight charge. In addition, whether samples are free or not depends on the quantity you buy.
Q3: How do you pack the products?
A3: In general, we use wood, plastic or carton boxes. We also put some soft materials inside to prevent possible damage on products.
Q4: How much advance payment do I need to make?
A4: If the products you buy are in stock, you need to make full payment; if the products are out of stock, you need to make about 50 percent of full payment and then we will start the production process. However, you still need to pay the rest of charges before we deliver the products.
Q5: What kinds of payment do you accept?
A5: In addition to the patterns of payment shown above, you can discuss with us about in which way you would like to pay.
Please contact us if you have any other questions.