Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd.
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. Comprehensive,high quality,Efficiency
Add to Cart
Cemented Tungsten Carbide Hard Alloy Screw Cold Heading Dies Mian Dies Forming Dies Mould
In standard parts industry, tungsten carbide cold heading dies need to under great unit pressure in cold upsetting deformation process , when a large degree of deformation and material hardness, units of pressure up to 2000MPa more.
At the same time the metal flow intense, thus requiring tungsten carbide cold heading dies have high strength, high hardness and good fatigue resistance, in order to ensure the cold heading dies under high pressure without breaking, deformation and wear resistance.Tungsten carbide cold heading die raw material is produced by powder metallurgy composite materials, which have high hardness, wear resistance,life is several times and several hundred times than ordinary cold heading die.
With carbide manufacturing standard tungsten carbide cold heading die, not only have high dimensional accuracy of parts, but also greatly improve the life of the cold heading die, can create good economic and social benefits.
Grade List
| Grade and Application | ||||
| Grade | Density (g/cm³) | Hardness (HRA) | Bend Strength (N/mm²) | Performance & Application Recommended |
| YG11 | 14.4 | 88.5 | 2600 | Forming of stamping dies for metal powders and nonmental powders |
| YG15 | 14 | 87.5 | 2800 | For fabricating drawing dies of steel tubesand rods under high |
| Compressibility ratio,punching ,stamping,forging tools under large stress. | ||||
| YG20 | 13.5 | 85.5 | 3200 | For fabricating of stamping dies for watch parts,spring plates of musical |
| Instruments,battery jars, small sized stell balls,screws.screw caps | ||||
| YG16C | 13.9 | 85.5 | 2900 | Impact resistance,hot & forging dies,etc. |
| YG18C | 13.7 | 84.5 | 3100 | Impact resistance forging dies,hot-press forging dies and rollers. |
| YG20C | 13.5 | 83.5 | 3300 | Dies for wear resistant or impact resistant application |
| YG22C | 13.3 | 83 | 3500 | Nut forming dies and high impact resistance forging dies |
| YG25C | 13.1 | 82.5 | 3600 | Stainless bolt header dies and rollers |
| Dimension | ||
| D | d | H |
| 10.0-44.0 | 1.5-6.0 | 20.0-60.0 |
| 32.0-50.0 | 6.2-10.0 | 32.0-60.0 |
| 40.0-40.0 | 11.4-15.0 | 20.0-60.0 |
| 40.0-+50.0 | 15.4-20.0 | 20.0-75.0 |
| 45.0-70.0 | 21.0-25.0 | 20.0-85.0 |
| 55.0-75.0 | 26.0-30.0 | 25.0-40.0 |
| 75.0-90.0 | 30.5-38.0 | 30.0-40.0 |
| 80.0-100.0 | 42.0-50.0 | 30.0-50.0 |
| 90.0 | 52.0 | 40.0 |
| 100.0 | 60.0 | 40.0 |
| 100.0 | 61.5 | 20.0 |
| 120.0 | 70.0 | 40.0 |
| 130.0 | 80.0 | 40.0 |
| 140.0 | 85.0 | 40.0 |
| Dimension | |||
| d | D | H | α° |
| 20 | 9 | 22 | 1° 30° |
| 20 | 9.4 | 22 | |
| 21 | 10.4 | 20 | |
| 25 | 12.2 | 20 | |
| 30 | 12.5 | 22 | |
| 25 | 13 | 20 | |
| 30 | 13 | 22 | |
| 36 | 18.8 | 22 | |
| 36 | 19.2 | 22 | |
| 32 | 19.4 | 20 | |
| 40 | 22 | 22 | |
| 38 | 22.5 | 20 | |
| 40 | 22.5 | 22 | |
| 40 | 23.5 | 22 | |
| 38 | 23.9 | 20 | |
| 40 | 24.2 | 22 | |
| 47 | 28.8 | 20 | |
| 47 | 30.8 | 20 | |
| 46 | 31.2 | 22 | |
| 47 | 31.8 | 20 | |
| Dimension | |||||||
| D | d | H | a° | D | d | H | a° |
| 14.0 | 2.1 | 15.0-30.0 | 20.0 | 30.0 | 8.4 | 25.0-54.0 | 20.0 |
| 16.0 | 2.1 | 15.0-30.0 | 30.0 | 10.0 | 14.0-20.0 | ||
| 14.0 | 3.1 | 15.0-30.0 | 28.0 | 10.2 | 25.0-54.0 | ||
| 16.0 | 3.1 | 15.0-30.0 | 30.0 | 10.2 | 25.0-54.0 | ||
| 14.0 | 3.9 | 15.0-35.0 | 40.0 | 11.9 | 30.0-40.0 | ||
| 16.0 | 3.9 | 15.0-35.0 | 40.0 | 12.0 | 10.0-14.0 | ||
| 16.0 | 4.5 | 10.0-20.0 | 40.0 | 14.0 | 14.0-20.0 | ||
| 16.0 | 4.7 | 15.0-35.0 | 45.0 | 17.5 | 14.0-20.0 | ||
| 18.0 | 4.7 | 20.0-35.0 | 45.0 | 19.5 | 20.0-30.0 | ||
| 20.0 | 6.5 | 20.0-42.0 | 50.0 | 21.0 | 20.0-30.0 | ||
| 22.0 | 6.5 | 10.0-42.0 | 60.0 | 24.0 | 25.0-30.0 | ||
| 30.0 | 8.0 | 10.0-20.0 | 60.0 | 26.5 | 25.0-30.0 | 12.0 | |
| 26.0 | 8.4 | 25.0-54.0 | 70.0 | 32.0 | 25.0-30.0 | ||
| Dimension | |||||||
| D | d | H | a° | D | d | H | a° |
| 13.0 | 2.8 | 30.0 | 90.0 | 30.0 | 6.4 | 30.0 | 90.0 |
| 16.0 | 3.8 | 30.0 | 30.0 | 6.4 | 55.0 | ||
| 16.0 | 3.8 | 40.0 | 36.0 | 8.2 | 55.0 | ||
| 22.0 | 3.8 | 50.0 | 40.0 | 10.0 | 55.0 | ||
| 16.0 | 4.6 | 30.0 | 45.0 | 10.0 | 55.0 | ||
| 22.0 | 4.6 | 50.0 | 60.0 | 13.8 | 60.0 | ||
Production Process
FAQ
Q1: How can I place order?
A1: You can contact us by email about your order details, or place order on line.
Q2: How can I pay you?
A2: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
Q3: What’s the order procedure?
A3: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15 days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
Q4: How do you take care when your clients received defective products?
A4: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Q5: How do you check all the goods in the production line?
A5: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.