Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd.
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. Comprehensive,high quality,Efficiency
Add to Cart
High Wear-resistance Tungsten Carbide Sandblast Nozzles, Carbide Blasting Nozzle
Tungsten Carbide Nozzle's Usage
Tungsten carbide sandblasting nozzle has been widely used in sandblasting and shot peening equipment, offering a long life with optimum air and abrasive use.
Cemented carbide nozzle is mainly used in chemical, food, machinery, metallurgy, construction and other industries to produce powder, remove rust, clean, atomize, etc.. There are more than 800 specifications’ hard alloy nozzles. It is preferred environment-friendly product for factories who have cement and other working environment and have serious dust pollution to remove dust and pollution. All kinds of atomized discs have precise sizes and shapes, fine atomized particle sizes and full combustion. Hard alloy nozzle is used in oil-fired heating furnace, industrial furnace of oil burning boiler and other heating furnace for special use. We also can produce customized hard alloy nozzles according to drawings. Materials of hard alloy nozzle are YG6,YG8,YG11,YWN8.
Nozzles are built to speed the flow of gases, liquids and slurries of virtually any viscosity and to withstand punishing wear, erosion and/or chemical attack in harsh chemical and powder service environments. They have proved to be a high performance, long-lasting alternative to hard steel.
Features For Tungsten Carbide Sandblasting Nozzles
Less maintenance, High hardness, low density and excellent wear-resistant and anti-corrosion,
Grade List
| Grade | Co (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) |
| XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 |
| XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 |
| XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 |
| XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 |
| Grade | Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) |
| XN100 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 1800 |
| XN101 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 2200 |
| XTN10 | 19.5-20.5 | 6.5-7.5 | 90.5-92.0 | 2800 |
| Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) |
| XTT50 | 14.0-15.0 | 8.9-9.5 | 89.0-91.0 | 1600 |
| XTP10 | 7.0-9.0 | 11.5-13.0 | 89.5-91.0 | 1800 |
Details Of Tumgsten Carbide Nozzle
| Type | Dimension (mm) | |||
| φC ±0.15 | φA ±0.15 | φB±0.15 | φD ±0.15 | |
| XJO1-64 | 6.4 | 20.3 | 15.8 | 6.4 |
| XJO1-71 | 7.1 | 20.3 | 15.8 | 7.1 |
| XJO1-86 | 8.6 | 20.3 | 15.8 | 8.6 |
| XJO1-94 | 9.4 | 20.3 | 15.8 | 9.4 |
| XJO1-109 | 10.9 | 20.3 | 15.8 | 10.9 |
| XJO1-117 | 11.7 | 20.3 | 15.8 | 11.7 |
| XJO1-127 | 12.7 | 20.3 | 15.8 | 12.7 |
| XJO1-142 | 14.2 | 20.3 | 15.8 | 14.2 |
| Type | |||
| φB | φA(φD) | φC | |
| XJ02-64 | 6.4 | 18.8 | 14.73 |
| XJ02-71 | 7.1 | 18.8 | 14.73 |
| XJ02-86 | 8.6 | 18.8 | 14.73 |
| XJ02-94 | 9.4 | 18.8 | 14.73 |
| XJ02-109 | 10.9 | 18.8 | 14.73 |
| XJ02-117 | 11.7 | 18.8 | 14.73 |
| XJ02-127 | 12.7 | 18.8 | 14.73 |
| Type | Dimension (mm) | ||||||||
| φA ±0.25 | φB ±0.25 | φC ±0.25 | φD ±0.20 | φE ±0.20 | F ±1 | G ±1 | M ±1 | K ±0.5 | |
| XP01-1 | 24.5 | 30.0 | 5.0 | 9.0 | 18.0 | 50.0 | 69.0 | 21.0 | 130.0 |
| XP01-2 | 24.5 | 30.0 | 8.0 | 12.5 | 20.0 | 50.0 | 69.0 | 21.0 | 140.0 |
| XP01-3 | 24.5 | 30.0 | 10.0 | 13.5 | 21.0 | 50.0 | 69.0 | 21.0 | 170.0 |
| XP01-4 | 24.5 | 30.0 | 13.0 | 19.5 | 27.0 | 50.0 | 69.0 | 21.0 | 226.0 |
| XP01-5 | 30.0 | 36.0 | 6.5 | 12.5 | 19.5 | 54.0 | 70.0 | 20.0 | 130.4 |
| XP01-6 | 30.0 | 36.0 | 8.0 | 12.5 | 12.5 | 54.0 | 70.0 | 20.0 | 141.0 |
| XP01-7 | 30.0 | 36.0 | 11.0 | 15.0 | 12.5 | 55.0 | 69.0 | 21.0 | 200.0 |
| Type | Dimension (mm) | ||||||
| φA ±0.25 | φB ±0.25 | φC ±0.20 | φD ±0.20 | φE ±0.25 | F ±2 | K ±0.5 | |
| XP02-1 | 32.0 | 25.0 | 6.2 | 8.0 | 16.0 | 45.0 | 78.0 |
| XP02-2 | 32.0 | 25.0 | 8.0 | 10.0 | 18.0 | 45.0 | 78.0 |
| XP02-3 | 32.0 | 25.0 | 11.0 | 13.0 | 21.0 | 45.0 | 78.0 |
| XP02-4 | 38.0 | 32.0 | 6.2 | 6.2 | 16.0 | 45.0 | 80.0 |
| XP02-5 | 38.0 | 32.0 | 8.0 | 8.0 | 18.0 | 45.0 | 80.0 |
Product Application Scene
Production Process
FAQ
Q1: How long is your delivery period?
A1: It depends on specific conditions. However, it could be 10 to 15 days on average.
Q2: Do you offer samples?
A2: Yes, we do offer samples. However, buyers need to pay for the freight charge. In addition, whether samples are free or not depends on the quantity you buy.
Q3: How do you pack the products?
A3: In general, we use wood, plastic or carton boxes. We also put some soft materials inside to prevent possible damage on products.
Q4: How much advance payment do I need to make?
A4: If the products you buy are in stock, you need to make full payment; if the products are out of stock, you need to make about 50 percent of full payment and then we will start the production process. However, you still need to pay the rest of charges before we deliver the products.
Q5: What kinds of payment do you accept?
A5: In addition to the patterns of payment shown above, you can discuss with us about in which way you would like to pay.
Please contact us if you have any other questions.