Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd.
Zigong Xingyu Cemented Carbide Dies & Tools Co., Ltd. Comprehensive,high quality,Efficiency
Add to Cart
Good Corrosion Resistance and Polished Tungsten Carbide Rod
Tungsten carbide rod (also named as cemented carbide rod), are used in making high quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer.
1. Grade: ISO K05-K40
2. Dia: 2mm-30mm; Length: Standard or customized
Key Specifications/Special Features:
Product information
1. Hardness can reach to HRA 94, TRS ≥4000 N/mm².
2. The sizes of the rods can be customized as your requirements.
3. Blank rods and polished rods can be chosen.
4. The minimum diameter is φd 0.025mm and the tolerance can reach to ±0.001mm.
5. Common diameter from 1mm---30mm
6. Diameter tolerance: +0.3--0.8mm; length tolerance: +0.3--1.8mm.
Product Features
1. Our cemented carbide rods use dry isostatic pressing machine and low press sintering technology,
which showed uniform distribution of coblat magnetic, high hardness and bending strength.
2. Inner structure are more compact and well distributed in metallographic test.
3. It can reach a mirror effect surface after accurate grinding.
Application
used in welding/making the drill bits/endmills/reamers .automobile special cutters, printed circuit board special cutters, engine special cutters, Horologe processing special cutters, integral vertical milling cutter, graver and more.
Besides, they can but used for making of cemented carbide stamping head, Core bar and perforation tools.
Specification
WC grain size range: 0.3-0.5μ.m, 0.5-0.9μ.m, 1.0-1.3μ.m, 1.4-2.0μ.m.
Length range: 3mm-600mm (general)
Length: 100mm, 300mm, 320mm, 330mm
Diameter grade: h4 (H4), h5 (H5), h6 (H6), h7 (H7), h8 (H8), h9 (H9 and more
Good grinding machine to ensure the sphericity & the linearity of rod at higher level standard
Sphericity tolerance range: 0.001mm - 0.005mm
Linearity tolerance range: 0.001mm - 0.1mm
Surface roughness can be reached to: RA0.04. (Reach a mirror effect surface after fine grinding)
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application | ||||
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 | ||||
| YG3 | K01 | 97 | 3 | 14.90 | 91.00 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting. | |
| YG6 | K10 | 94 | 6 | 15.10 | 92.00 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron. | |
| YG6X | K20 | 94 | 6 | 15.10 | 91.00 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing. | |
| YG8 | K20-K30 | 92 | 8 | 14.90 | 90.00 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting. | |
| YG10 | K40 | 90 | 10 | 14.70 | 89.00 | 1900 | Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses. | |
| YG10X | K40 | 89 | 10 | 14.70 | 89.50 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring tools, etc. | |
| YG15 | K30 | 85 | 15 | 14.70 | 87.00 | 2100 | Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses. | |
| YG20 | K30 | 80 | 20 | 13.70 | 85.50 | 2500 | Stamping die, stamping watch parts, musical instrument spring piece. | |
| YG20C | K40 | 80 | 20 | 13.70 | 82.00 | 2200 | punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate. | |
| YG30 | G60 | 70 | 30 | 12.80 | 82.00 | 2750 | Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die. | |
Details Of Tumgsten Carbide Rod
| Outer Diameter (mm) | Inner Diameter (mm) | Length (mm) | OD Tolerance (mm) | ID Tolerance (mm) | Length Tolerance (mm) |
| φ2-7 | φ0.4-3.0 | 330 | +0.6 +0.2 | +0.0 -0.2 | +7.0 +3.0 |
| φ8-11 | φ0.4-7.0 | 330 | +7.0 +3.0 | +0.0 -0.2 | +7.0 +3.0 |
| φ12-19+7.0
| φ0.4-10.0 | 330 | +0.9 +0.4 | +0.0 -0.3 | +7.0 +3.0 |
| φ20-30 | φ0.4-16.0 | 330 | +0.1 +0.5 | +0.0 -0.3 | +7.0 +3.0 |
| Specification D*L | Diameter Tolerance (mm) | Length Tolerance (mm) | Specification D*L | Diameter Tolerance (mm) | Length Tolerance (mm) |
| φ1.0-2.5*330 | +0.25 +0.15 | +7.0 +3.0 | φ15.9-19.5*330 | +0.60 -0.30 | +7.0 +3.0 |
| φ3.0-9.5-330 | -0.40 +0.20 | +7.0 +3.0 | φ20.0-29.5*330 | +7.0 +0.40 | +7.0 +3.0 |
| φ10.0-15.0*330 | +0.50 +0.30 | / | / | / | / |
| Outer Diameter (mm) | Double Inner Hole Diameter (mm) | Pitch-raw TK(mm) | Length (mm) | OD Tolerance (mm) | ID Tolerance (mm) | Pitch-raw TK(mm) | Length Tolerance (mm) |
| φ4-11 | φ0.8-1.4 | 1.72-4.85 | 330 | +0.4 +0.3 | ±0.10 | ±0.20 | +7.0 +3.0 |
| φ12-19 | φ1.75-2.0 | 5.85-8.85 | 330 | +0.7 +0.4 | ±0.15 | ±0.25 | +7.0 +3.0 |
| φ20-24 | φ2.5 | 9.80-11.75 | 330 | +0.8 +0.5 | ±0.20 | ±0.30 | +7.0 +3.0 |
| φ25-30 | φ3.0 | 11.75-13.75 | 330 | +0.9 +0.6 | ±0.25 | ±0.35 | +7.0 +3.0 |
Production Process
FAQ
Q1: Are you trading company or manufacturer ?
A1: We are factory.
Q2: How long is your delivery time?
A2: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q3: Do you provide samples ? is it free or extra ?
A3: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q4: What is your terms of payment ?
A4: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.